230/90/185/45 5 Stud Polyurethane Drive Wheel - Wet Grip - 80 Shore A
This drive wheel has a high-quality soft polyurethane tread directly bonded to a cast iron centre. The tread is non-marking and offers good dynamic load capacity, mechanical wear resistance and a good compression set. Resistant to many chemicals and oils, and with low water absorption makes this wheel ideal for most material handling applications. The tread is specially formulated with wet grip granules to offer lower rolling resistance and increase traction on wet and slippery floors. This drive wheel is also available in alternative tread materials.... Polyurethane (P6218), Rubber (P4356), Vulkollan (P2582) and Quartz (P2583).
General information
| Product Code | P1024 |
|---|---|
| Product Type | Drive Wheel |
| Tread Material | Polyurethane Soft - Wet Grip |
| Manufacturer | Linde, Still Wagner |
| Load Capacity (kg) | 1230 |
| No Of Studs | 5 |
| Bolt Hole Type | Countersunk |
| Tread Hardness | 80 Shore A |
| Hub Material | Cast Iron |
| Tread Surface | Rough |
| Unit Weight (kg) | 6.88 |
Dimensions |
|
| Wheel Diameter (mm) | 230 |
| Tread Width (mm) | 90 |
| Inner Diameter (mm) | 185 |
| Bore Hole Diameter (mm) | 45 |
| Pitch Circle Diameter (mm) | 70 |
| Stud Hole Diameter (mm) | 13 |
